If you are not familiar with racking, it is important to understand that racking does not refer to bottling the wine. This is a misinterpretation. Basically, racking involves siphoning the wine from one container to another. The purpose behind this is making sure that all of the sediment is left behind.

The first racking typically occurs about five days into the fermentation process. In some cases, you may wait one to two days; however, the first racking should always occur by day 7. This is because by this time you will need to place an air lock on the container in order to protect the wine must due to the fact that the fermentation has slowed down. Outside contaminant could easily influence the wine, so you will need to provide necessary protection using an air lock.

You will also usually find that at this point in the fermentation process at least 70% of the sediment will have already begun to appear. If you rack between days five and seven, this will be a good opportunity to get rid of most of the sediment. It will be some time before the remainder of the sediment appears. Racking at this point is also important because it presents you with a chance to remove pulp from the must. This is imperative if you used fresh fruit instead of concentrate. If you leave pulp in the must for any longer, you may find that your wine has a harsh taste.

The second racking should take place when the fermentation process has been completed. The amount of time necessary for this to occur may vary. In some cases it may take only a few days following the first racking while in other cases it could be several weeks following the first racking. The amount of time depends on how quickly the fermentation progresses. After you have completed the second racking, do take care to re-apply the air lock as the must will still need some time in order to clear.

The third racking should take place after the wine has become completely clear. This will give you the chance to get rid of any remaining sediment. Under specific circumstances, you may find that it is necessary to perform subsequent rackings. For example, when you are aging a heavy red wine in bulk, you may find it necessary to rack the wine approximately every three months or so. This is because some sediment may still occur over the course of the wine being stored in bulk for a long period of time.

In the event you decide to use clarifiers or finings you may also need to perform subsequent rackings. In this case, you would need to rack the wine once before the wine is treated and then once again after treatment. It should be noted that it is entirely possible to rack your wine too many times. This should be avoided as it can cause the wine to become over-oxidized.

Timing your Racking is a post from: Wines For All

By far, the most common problem in most winemaking failures can be attributed to equipment that is inadequate. Many people make the mistake of using common household items for their winemaking because they seem to be familiar to the carboys, spoons and air locks that are required for the process. It is important to note; however, that specific winemaking equipment is constructed of special materials. Using products made from other materials can have an impact on your finished wine.

In general, it is a mistake to attempt to reuse products that have previously held other items, especially foods. While you may believe that the container is clean, too frequently food odors will have become immersed into the plastic and as a result your wine may become tainted. In addition, it is not a good idea to use even brand new plastic pails due to the fact that the UV protectants that are used in the plastic could leak into the wine. It is far better to go ahead and invest the money necessary to purchase proper winemaking equipment so that you can be certain of the success of your wine.

Failing to follow instructions is another common mistake. The process for making wine may seem to some beginning winemakers to be complicated. As a result, there usually exists a strong urge to simplify the process. This is generally a mistake. If you are an experienced cook, you probably understand the necessity to follow the directions of a recipe. Veering from the recipe usually results in disaster. The same is true in winemaking.

The quality of your water can also impact the quality of your wine. Hard water or water that has a high mineral content can result in wine that has flavors that are somewhat off or even have somewhat of a haze. It is also important to know that water from a salt-exchange water softener should not be used for winemaking. To be certain of the best quality wine, it is usually best to use bottled water for your winemaking. The difference in the results will certainly be appreciable.

Proper yeast handling is also essential. Have you ever made homemade bread? Yeast must be moistened at the proper temperature in order to become activated. If the temperature is too cold, the yeast will fail to activate. If it is too hot, it will kill the yeast. This is because yeast is a living organism and it must be handled properly for success. As a result it is imperative to make sure that you maintain proper temperature control during the fermentation process. Ideally, it is best to try to maintain a temperature between 65 and 75 degrees Fahrenheit. Be certain the temperature remains consistent. If the temperature in your fermentation area is too cool, the formation process will take too long, which can lead to excess fizz in your wine.

Another common mistake is eliminating the sulfite in the wine. The most common reason for this is sulfite allergies. It is true that some people are allergic to sulfites; however, it is important to point out that even if you eliminate the sulfite from the wine the wine will still not be completely sulfite free due to the fact that the yeast always creates additional sulfites anyway. The purpose of the sulfites is to prevent spoiling and oxidation. In less than a month the wine will begin to taste somewhat off and in less than three months it will be rendered practically undrinkable.

Finally, make sure that you give your wine the proper amount of patience and time that it requires. Successful winemaking truly is an art form. In order to appreciate the results of your labor it really is best to wait the amount of time necessary for the wine to improve before you attempt to drink it. In far too many cases, beginner winemakers have believed they had a bad batch of wine when the problem was that they were trying to drink it too soon. Be patient and wait and you will appreciate the effort.

The Most Common Problems in Winemaking is a post from: Wines For All

As the fermentation nears the end of the cycle, there should be a significant amount of active yeast cells which are beginning to wind down because they are running out of fuel; or sugar. After the sugars have become consumed the active yeast will begin to starve and feed on itself. An enzyme will be produced that will break down the inactive yeast cells. The purpose of this is to release the nutrients in the dead yeast cells that can be used by the yeast cells that are still active. This process is called autolysis. Over a period of time, an otherwise perfectly good batch of wine may be ruined as a result of this process.

Racking is also important because it can assist in the clarification of the wine. If wine is not racked, the end result will be wine that may be clear on top; however, the bottom will be somewhat thick and hazy.

The racking process is not terribly difficult. In fact, it is quite simple. A siphon is necessary for racking. The key; however, is to make sure that you siphon off the wine without stirring up any of the sediment. It should be noted that while food grade hosing can be used many winemakers do prefer to use what is known as a racking tube in order to rack their wine. This is because, if you are not careful; using a hose to rack the wine can cause the sediment to become stirred up and it may also move around. A racking tube fits on the end of the hose and serves as a type of wand that gives you control over where in the container you draw the wine.

In the old days, wine was racked by manually sucking on the end of the hose; however, today there have been numerous advancements made in winemaking equipment. One of those advancements is an automatic siphon that works with a pump in order to start the siphoning action.

Keep in mind that during the first two to three rackings, it is not essential to remove all of the sediment. You should try to siphon as much of the wine liquid as possible; however, even if you do bring up a small amount of the sediment this will be fine. It is during the final racking that it becomes imperative that you make sure that all of the sediment is left behind with none following through into the wine.

After the fermentation process has been completed, it you still need to rack the wine (such as when storing wine long-term in bulk) it may be necessary to add Campden Tablets to the wine. The purpose of this is to ensure that any air that may have entered the wine during the racking process is driven out. Campden Tablets will also help to minimize oxidation. Keep in mind that this is not a problem when racking wine while the fermentation process is ongoing as the CO2 that is produced during fermentation will naturally eliminate any air that may have been introduced.

The Importance of Racking is a post from: Wines For All

If this is a completely new process to you; however, and you have not previously done any home brewing then it is important to make sure you understand the role of both patience and cleanliness in the process of successful winemaking.

Cleanliness is one of the most important steps of making wine. If your work area and equipment are not clean you will find that you encounter innumerable problems in the process and the end result will not be successful. One of the keys to producing good wine is to make sure that your equipment as well as your work area is kept very clean and sterile.

Before you begin any new batch of wine you will want to make sure that your equipment has been cleaned and sanitized thoroughly. The most common cause of homemade wine becoming contaminated is equipment that has been poorly cleaned. In fact, it has been estimated that as much as 90% of failures in winemaking can be attributed to poor sanitation.

To avoid this problem, make sure that you sanitize all of your equipment that will touch either the juice or the wine. This can be easily done by rinsing all equipment using a solution of MetaBisulfate. Potassium MetaBisulfate is an active ingredient that is used in Campden tablets; a compound that is frequently used for sanitizing brewing equipment.

Place 3 tablespoons of the compound into a 1-liter container of hot water. If the container is kept tightly sealed and stored at room temperature, the cleaning solution should last up to six months. Using the solution, make sure all equipment is rinsed thoroughly. Next, rinse all equipment with cold water.

Make sure you take the time to clean all equipment before you store it as well as before you take it out of storage before each use. This will help you to avoid any contamination problems and assure that your equipment lasts as long as possible.

In addition, patience is quite important as well. One of the most common mistakes of many new winemakers is a lack of patience. They want to rush through the steps and as a result discover that their wine is not all that it could be. Remember that just because wine is ready to bottle that does not necessarily mean that it is ready to drink. While it is common to be anxious to drink your homemade wine, waiting is well worth the effort. At a minimum, it is usually about a month from the time your wine is bottled before it will be ready to sample. Generally; however, you should wait at least six months before your wines will have developed sufficient character and be ready for drinking. For heavy reds, be prepared to wait at least a year for the wine to improve. While waiting may be difficult, you can be assured that it will be rewarded with a bouquet that is absolutely delicious.

The Importance of Cleanliness and Patience in Winemaking is a post from: Wines For All

First, it is important to understand that while wine is generally made from grapes, you can actually use practically any type of vegetable matter to make wine. When grapes are used to make wine, they fall into three categories. They are red, white and ros; a pinkish white wine.

Red wines are not only different in color from white wines and ros wines but they also have flavors that are stronger and richer. The exact color of a red wine can vary from russet brown to full red to a dark purple color. It is the skin of the grapes that give red wines their color.

White wines typically have a more delicate flavor. The actual color of white wines can vary from the palest yellow to a deep gold. Some white wines can even have a pale green color.

Ros wines, also known as blush wines, are made with the same grapes as are used in red wines; however, they are submitted to a much shorter period of contact with the skin of the grapes. This results in a delicate blush color.

There are several different types of well known white wines. Chardonnay is one of the most popular types of white wines along with Sauvignon Blanc and Riesling.

Cabernet Sauvignon is one of the most popular types of red wines. Other popular reds include Grenache, merlot, pinot noir and Zinfandel.

It is also important to understand the sugar content of wine. Wines with less amounts of sugar are drier. You have probably noted that wines are classified in the store with numbers 1-3. Higher numbered wines have more sugar and are therefore sweeter.

You should also understand the difference between various types of wines and how they are typically served.

Apfitif wines are commonly served prior to a meal. They are commonly produced in either herbed or non-herbed varieties. The purpose of this type of wine is to stimulate the appetite; however, they are not frequently served with meals.

Table wine is commonly served with dinner at the table. This type of wine is commonly dry and for a very specific purpose. It is meant to compliment the food instead of compete with it. Typically, a white wine is served with white meat while red wine is served with red meat. The reasoning behind this is that white wine flavors tend to subtle in a similar fashion to the flavors of white meats. Red meats are stronger flavored and do well with red wines, which are also stronger flavored. With a ros, there is more flexibility. If the wine in question is somewhat dry, it will go with either red or white meat.

Dessert wines, of course, are served at dessert because they tend to be quite sweet. When dessert wines are served at other times, the sweetness of the wine can seem to be overwhelming.

After-dinner wines are also sweet; however, they tend to be served as one would guess; after dinner. While after-dinner wines may be spirits they could also be wines that are fermented. Brandy, sherry, port and liqueurs all fall into this category.

The Different Types of Wine is a post from: Wines For All

As you are already aware, the sugar level of your wine is incredibly important as it is the sugar that the yeast feeds off of in order to produce the alcohol. The amount of sugar that you start your batch with will ultimately determine the level of alcohol that is present in the final batch. In order to run these tests you will need to have a wine making hydrometer. This is not an area where you want to try and guess at how much alcohol and sugar is present.

The hydrometer gives you the ability to accurately test and measure the amount of sugar that is present in the juice and consequently the amount of alcohol that can be produced from the sugar. As a result, you will also be able to measure how much additional sugar you may need to add to the juice.

You can purchase a hydrometer online as well as in any winemaking store. It looks quite simple. It is comprised of a glass tube with a weight on one end that will float. Sugar levels are tested by reading how low or high it ultimately floats. Almost all hydrometers also have a scale on them. This is the Potential Alcohol scale. You can read this scale when you first start the fermentation process to determine whether you need to add additional sugar based on the amount of alcohol that you want to be present in the final wine.

If you determine that you need to adjust the sugar level in order to increase the alcohol level, you may wonder what type of sugar is the best type to use. There are many different types of options available. It is important to remember that each type of sugar will offer different characteristics. The different options include brown sugar, cane sugar, fructose, beet sugar, rice sugar, etc. Corn sugar and cane sugar are usually the cheapest and the most widely available; however, there is certainly nothing stopping you from experimenting with other sugar options if you have them available. Be sure to take notes so that you will know whether you want to use whichever type you decide upon again for future batches.

You will also need to test and possibly adjust the acid level of your wine. Remember that maintaining the right acid level in your wine will provide your wine with balance and character as well as assist in the fermentation process.

When testing acidity, it is important to keep in mind that it typically varies from one fruit to another. This is why it is so critical to test the acidity level and then make adjustments as necessary.

The best way to test the acidity level of your juice is to use a titration kit. You can find these at any winemaking store as well as online. This kit will help you to measure how acidic the wine will actually taste. For example, if there is too much acid in the wine then it will taste bitter or sour. If; however, it does not have enough acid then it will have a flat taste. Based on those readings, you will know whether or not you need to adjust the acidity level of your wine. If you find that you do need to make adjustments you can do so using one of three different fruit acids. They are citric, tartaric and malic fruit acids.

Once you are ready to bottle your wine, it is time to make any final adjustments that may be necessary. There are many ways in which you can adjust your wine in order to improve the flavor. Perhaps the easiest way to go about this is to simply experiment and find out what works well for you personally. By keeping notes, you will quickly discover what works and what you like and what should be avoided in the future.

Just a few ways you can adjust the flavor of the wine when bottling it includes blending it with other fruit based wines, adding spices or oak chips, body enhances or flavor enhances. You can even fortify your wine with something such as grain alcohol. The most critical rule that should be followed when making final flavor adjustments is to make sure that you adjust in small amounts. In other words, always experiment with small amounts rather than a full batch.

Testing and Adjusting your Wine is a post from: Wines For All

By stopping the fermentation at that point, many winemakers believe that they can preserve the amount of sweetness that the wine has already produced. If you want a really sweet wine, such as a dessert wine, this is certainly understandable. The idea behind stopping the fermentation process is that if you allowed the wine to continue fermenting it would become less sweet as time went on. When the wine became completely dry, the fermentation process would eventually stop on its own without any intervention from you.

As a result, there are several different methods that home winemakers tend to use when attempting to stop the fermentation process in order to preserve the sweetness. None of these methods work very well; however. Let us examine each.

One of those methods is using either Campden Tablets or Sodium Bisulfite. It should be noted that fermentation will not completely stop using these methods. You should also be aware that the chance does exist for some live yeast to be left in the wine, providing the opportunity for the fermentation process to begin again. In fact, it is not unknown for the process to begin again even after you have bottled your wine and stored it. Obviously, that would not be a good situation and would result in some really poor wine.

Another common option used by some winemakers is Potassium Sorbate. Generally, Potassium Sorbate is used for the purpose of sweetening wine. When it is used for the purpose it is commonly after the fermentation process has already been completed and you are ready to bottle your wine. The Potassium Sorbate is then added with sugar. The purpose of the Potassium Sorbate in this instance is to prevent the yeast from fermenting sugar that has just been added. When added prior to the end of the fermentation cycle; however, Potassium Sorbate will not kill the yeast; it only makes it sterile. This means that it stops producing but it doesnt stop the fermentation. In other words, it does not prevent the yeast from fermenting the sugar and turning it into alcohol.

If your goal is to preserve the amount of sweetness that is already in the wine, the best way to do this is to actually go ahead and let the fermentation continue on its own until it is completely finished. After the yeast has had an opportunity to settle over a couple of weeks, you will then be able to siphon the wine off and then add some Potassium Sorbate with some sugar.

Keep in mind that it is really imperative to allow the fermentation process to finish before you add anything like Potassium Sorbate or more sugar. If you are not sure whether the fermentation process has finished, you can check it using a hydrometer. Remember that this is the tool that you use to check the alcohol content of the wine. If the process has completed, there should be a reading of no more than 1.000 on the hydrometer.

Should you Stop the Fermentation Process? is a post from: Wines For All

Today there are many different styles of Ros wine available on the commercial market and many home based winemakers are experimenting with the different ways to produce Ros wine. Dry Ros wines, in particular, have become increasingly popular.

This type of wine may be referred to quite commonly as Ros; however, it is also referred to a blush wine. Generally, this rather pinkish wine is referred to as Ros in Europe, where it tends to be drier, while in the United States it is referred to as a blush wine. Most American blush wines tend to be far sweeter than their European counterparts.

If you are looking for a way to expand the types of wine that you produce there are several reasons to consider including a good Ros as part of your wine repertoire. First, while this type of wine has certainly earned a reputation as a sweet wine that does not necessarily mean that you must produce a very sweet Ros. A slightly off dry or very dry Ros wine can still be quite pleasant and fruity. In fact, in some cases, you can produce a Ros wine that is just as good in terms of quality as a red wine, if not better, in fact.

When deciding to venture into making Ros wine it is important to keep in mind that there are really three different ways in which to make Ros wine. The first method is known as blanc de noir. This means that a white wine is produced from red grapes. Another method, referred to as saigne, separates juice from red wine. The final method is blending red wine and white wine.

When skin contact is used to create Ros wine you will need to determine how long you wish to leave the skins of the grapes in contact with the juice because this will determine the color of the wine. In most cases, the time period is quite short; generally between two and three days. After this point the grapes are pressed and you can discard the skins. Keep in mind that the longer you leave the skins in contact with the juice, the deeper the color of the final wine will be. The exact type of grapes that are used with this method can also contribute to the color of the wine. For example, if you use a very deep colored grape then naturally the resulting wine is going to have a deeper pink color.

The saigne method, also referred to as bleeding, is often chosen when you want to have more color and tannin in a red wine while also removing the juice. The juice must be removed very early. This process is referred to as bleeding the vats. You can then ferment the juice separately and produce a Ros wine that is really more of a by-product of your red wine. Your separate red wine will then be far more intense because the volume of the juice has been reduced.

Blending is a very simple process that involves mixing red wine and red wine in order to add color to the red wine. Most wine makers have moved away from this method; however. Most people prefer to use one of the first two methods mentioned above. Primarily the only region in the world where blending is still used to produce a blush wine is Champagne, France.

When you begin making your first blush or Ros wine you may find that you need to experiment some in order to find what you like best. If you have tried blush wines previously you may already have an idea of whether you prefer a dry wine or a sweet wine. Experimenting with different methods as well as different types of grapes; however, will aid you in finding out which method you prefer and which one produces the most agreeable blush wines.

Making Ros Wines is a post from: Wines For All

There are actually more than five thousand different varieties of wine grapes. There are only two broad families; however. They are Vitis Vinifera and Vitis Labrusca. Vitis Vinifera is a European type of grape and include Merlot, Cabernet Sauvignon, Chardonnay and Riesling. Vitis Labrusca includes American grapes such as Concord, Catawba, Delaware and Niagara.

The process of growing grapes is known as viticulture. Factors such as soil, color, chemicals, geology, topography and climate are all important to that process. In most cases, grapes begin to bud during the spring and then grow and develop fruit during the summer.

During the growth period, it is extremely important to minimize the growth of the leaves, so as to allow more sunlight to reach the grape cluster. Attentive growers must also take care to be on the watch for indications of disease, pests and of course, drought.

By early fall the grapes are reading for harvesting. The exact time at which grapes need to be harvested can depend somewhat on the local climate as well as your own personal judgment.

The phase during which grapes begin to change color is known as vraison. This is an especially important phase for red or black grapes. Regardless of what color they will eventually become, all grapes begin as dark green and hard. It is only during the ripening phase in the sun that they begin to take on their true color. It is during this time that white varieties of grapes will begin to achieve their golden hue and red varieties of grapes will begin to take on their deep purple hue.

The natural sugar content as well as the ripeness of grapes determine the appropriate time for harvesting. When grapes are typically ready to harvest, the leaves on the grapevines of white varieties will begin to turn yellow while the leaves of red varieties will take on a red hue.

You may have wondered what accounts for the different price of wines when you purchase them in a wine store. The most expensive wines are produced from the first pressing of the grapes. This is frequently referred to as free run wine. Second and third pressings of the grape juice results in wine that referred to as press wine. Press wine is less expensive than free run wine because it is typically not of the same quality. Most press wine lacks the smoothness of free run wine. This is the great advantage of being able to grow your own grapes and then press them for your personal wine. You can have the advantage of enjoying first press wine and the smoothness that is associated with it.

Introduction to Wine Grape Growing is a post from: Wines For All

In reality, making wine at home is much easier than you might at first think. The entire process really only involves combining concentrate or fruit with a few simple other ingredients, placing it into the container and then letting it go to work. The resulting process is actually quite natural and will not require a lot of interaction from you. In fact, it could be said that all you really need to do is make sure that the proper proportions of ingredients are combined and then provided with an environment that is suitable and stable.

Before you begin making wine you will need to decide on a recipe. This part might actually be one of the hardest steps because there are so many home winemaking recipes from which you can choose. If you purchase a winemaking kit, the kit will probably contain at least one recipe you can use to get started. Even without a kit there are numerous winemaking recipes available online as well as in winemaking books.

You will also need to give some thought to the type of fruit that you want to use in your wine. Most wine varieties are made with grapes; however, there are also many wine recipes that call for the use of a wide array of fruits including strawberries, blackberries, apples and much more.

Beyond making wine from fruit, another option would be to make wine from concentrated juice. Wine juice concentrated can be easily purchased in a home brewing store as well as online. In fact, you will generally find that most concentrates contain directions and recipes on the package, so it is easy to get started even if it is your first batch. Many beginning winemakers prefer to use concentrated wine juices for their first batches because they are so easy to use. They are also available throughout the year, unlike fruit which may only be available during certain times of the year.

In addition, you will need to give some thought to whether you want to use a wine making starter kit. Many beginning winemakers do prefer these kits, at least in the beginning because they contain all of the ingredients and equipment that you need in order to make your first batch of wine. In addition, these kits will walk you step by step through the process. If you have delayed getting started making your own wine because you were intimidated by the process, these kits can help to demystify the process and guide you through the entire process with very little problems.

For your first batch of wine you will need a few basic ingredients. These ingredients are necessary whether you are making wine from fruit or concentrate.

Yeast nutrient is not yeast per se; instead it is a type of energy that is used to make sure the yeast starts the fermentation process. Pectic enzyme may be added to assist in the breakdown of the fruit during the fermentation process. Acid blend is used in controlling the amount of sharpness that is present in the wine. You may find in some cases that your wine seems somewhat flat. Acid blend can help to correct this problem. Wine tannin is the zest of fruit and is available in powder form. You may wish to add it to your wine in order to improve the wines character. Wine yeast is what actually starts the fermentation process by converting the sugar into alcohol. Campden tablets are typically added right before the fermentation and also before bottling. These tablets are used to make sure that the wine does not become spoiled.

How to Get Started Making Wine at Home is a post from: Wines For All